| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Drivetrain | Section: Axle/Differential | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000016X700LX |
| Title: AXLE AND DIFFERENTIAL: FRONT AXLE HUB: DISASSEMBLY (2008 Sequoia) | ||
DISASSEMBLY
NOTICE:
Do not allow foreign matter, etc. to contact the ABS rotor bearing.
1. REMOVE FRONT WHEEL ADJUSTING NUT (for 2WD)
|
(a) Using SST and a hammer, release the staked part of the adjusting nut. SST: 09930-00010 |
(b) Install a nut to the front axle hub, and fix it in a vise.
|
(c) Using SST and the L-type handle, remove the front wheel adjusting nut. SST: 09602-60010 |
2. REMOVE FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY
|
(a) Gently fix the front axle hub in a vise. NOTICE:
Do not damage the threads of the hub bolts. |
(b) Using SST, remove the bearing.
SST: 09950-40011
09951-04020
09952-04010
09953-04020
09954-04010
09955-04061
09957-04010
09958-04011
SST: 09950-60010
09951-00550
|
(c) If part of the bearing remains in the front axle hub, use SST to remove it. SST: 09950-00020 SST: 09950-00030 |
3. REMOVE FRONT AXLE HUB OIL SEAL
|
(a) Using a screwdriver, pry the oil seal. |
|
|